Jump to page №

Limit value switches

Capacitive level switch Capcont M

Capacitive level switch Capcont M

Capacitive level switch
Capcont M

Made in Germany

Description

The level limit switch Capcont M with integrated evaluation electronic are compact fill level limit switches for supervision of fill levels in liquids and solid materials in containers or pipelins at process temperatures from -30°C to +125°C and process pressures from -1 up to 10 bar.

The sensor is suitable for limit value detection or also as dry run protection in liquids and viscous substances but also in powdery and fine-grained materials, like e.g. grain, flour, powdered milk, mixing food, cement, chalk or gypsum. It can be used in electrically conductive as well as non-conductive materials.

Function

The fill level limit switch Capcont M is a capacitive operating sensor with limit value detection. Electroden rod, filling material and container wall realizes an electrical capacitor. A fill material changing causes a capacity change that is evaluated by the electronic and is converted into a corresponding switching reaction.

At transgression or underrun of the limit value a switching signal at the PNP switching output is created. This allows a control of relays, contractors, magnetic valves, light signaling units, horn as well as SPS inputs. A plugable yellow LED indicates an active PNP switching output. A possibility for change over the minimum / maximum safety is integrated.

Spannungsversorgung 10 V bis 35 V DC
Restwelligkeit ≤ 2 VSS
Stromaufnahme ≤ 10mA Schaltausgänge im Leerlauf
Isolationsspannung 75 V DC
Funktion PNP-schaltend auf +Vs, Prinzip (NO/NC)
Ausgangsspannung VS1 ≥ +Vs – 2V
Ausgangsstrom ≤ 250mA strombegrenzt, kurzschlussfest
Anstiegszeit ≤ 30µs RL ≤ 3000 Ω
IL ≥ 4,5mA
Verzögerungszeit ≤ 200ms
Schaltzyklen ≥ 100.000.000
Schalthysteresen Abhängig vom Medium
Empfindlichkeitsabgleich Trimmer mehrgängig
Elektrodenstabisolation PTFE – Polytetrafluorethylen (Teflon)
Prozessanschluss Stahl 1.4404 (AISI 316L), Stahl 1.4571 (AISI 316Ti)
Anschlussgehäuse Aluminium-Druckguss, pulverbeschichtet
Kabelverschraubung Verschraubung: Messing, vernickelt, Dichtung: CR / NBR
Dichtung FPM – Fluorelastomer (Viton), EPDM – Etylen-P

Examples of supplied versions: expand / close

Capcont MA01V3A0K Capcont MB01V3A0K
Capcont MC01V3A0K Capcont MA11V3A0K
Capcont MB11V3A0K Capcont MC11V3A0K
Capcont MA02V3A0K Capcont MB02V3A0K
Capcont MC02V3A0K Capcont MA12V3A0K
Capcont MB12V3A0K Capcont MC12V3A0K
Capcont MA03V3A0K Capcont MB03V3A0K
Capcont MC03V3A0K Capcont MA13V3A0K
Capcont MB13V3A0K Capcont MC13V3A0K
Capcont MA04V3A0K Capcont MB04V3A0K
Capcont MC04V3A0K Capcont MA14V3A0K
Capcont MB14V3A0K Capcont MC14V3A0K